K-Panel 0.42BMT Colorbond Sheet

1. Measure the width of your wall to find the amount of sheets you need to cover the building
2. Divide the length by 0.864 which is the sheet coverage (i.e. 7m ? .864 = 8.101 sheets) so round up to 9 sheets for this building.
3. Round up the result to the nearest whole number.
4. Measure the required sheet length up the building walls? for the height to find the required sheet length.
5. For wall sheeting allow approximately 30mm overlap at the base past the slab
6. Then choose your colour and quantity ?and your good to order.

Please note that this calculation is based on a standard sheet size and may vary depending on the specific dimensions and profiles of the sheets you are using. Factors such as the type of roofing or wall cladding, overlap requirements, and the shape of your structure can all impact the final number of sheets needed. For accurate results, it is essential to measure carefully and consider any allowances for overlaps or cutting. If you are unsure about your measurements or the number of sheets required, we strongly recommend consulting with a qualified roofing professional. Alternatively, our experienced help desk team is always available to assist you, providing expert advice and guidance to ensure you order the correct quantity of sheets for your project in Australia.